Fix it
Bad picture at night
White haze, glare or blur once IR kicks in. Almost always reflection.
Quick fix
- Clean the dome or lens cover. Dust and fingerprints scatter IR.
- Look for webs, straps and cables in front of the lens. Spiders love IR.
- Check what's close to the camera: a white wall, eave or gutter bounces IR straight back.
- Re-aim it so less of the wall or eave is in frame, or move it.
- Turn IR down or turn on smart IR. Use an external IR light if the camera can't see far enough.
Draft. Not yet checked on site. Confirm against the manual. Report an error
Other causes
- Wrong mount or dome bubble not seated, so IR bounces inside the housing.
- Steep tilt, so IR reflects off the camera body.
- Fog or mist on the dome. Use a sunshade or a different housing.
- Bright lights in frame. Mask them, or adjust day/night switching.
Source: i-PRO's IR reflection guide (applies to most brands).