Fix it
NVR can't see cameras
Camera offline, no video or password error. Power, network or password?
Quick fix
- Read the camera's status on the NVR. Offline, password error or IP conflict tells you where to start.
- Powered? IR glowing at night, or check the PoE port light.
- Swap the patch lead and port. Bad RJ45 terminations are the number one cause.
- Password error = the camera's password doesn't match what the NVR's sending. Edit the channel, or factory reset the camera and re-add it.
- Camera on a switch? Find it with the brand's tool (SADP, ConfigTool) and make sure it's activated and on the NVR's subnet.
Draft. Not yet checked on site. Confirm against the manual. Report an error
Cabling and power
- Ethernet tops out at 100 m. Longer runs, or heavy cameras (PTZ, heaters), drop out.
- Too many cameras can blow the NVR or switch's total PoE budget. Check the datasheet.
Discovery tools
| Brand | Tool |
|---|---|
| Hikvision | SADP |
| Dahua | ConfigTool |
| Uniview | EZTools |
Still nothing
- Update NVR and camera firmware from the manufacturer's own site. Old NVRs struggle with new cameras.
- Check the camera's on the NVR's compatibility list.