Home › Fix it › Locked out of an alarm panel
Fix it

Locked out of an alarm panel

Takeover or lost installer code. The legit ways back in, by brand.

Quick fix

  1. Make sure you're working for the owner and the old company's contract is finished.
  2. Try the user menu first. Many fixes don't need the installer code.
  3. Find the model on the board, then use the reset method for that brand below.
  4. Most hard resets wipe programming. Write down zones, codes and monitoring details first if you can.
  5. Change the installer code once you're in, and record it in your handover.

Draft. Not yet checked on site. Confirm against the manual. Report an error

We don't publish default codes. These are the reset methods from the manufacturers' own manuals.

By brand

Panel Method
Inner Range Inception Board reset button: 5 quick presses = installer login reset only. Hold 5 s = full factory default
Inner Range Integriti (IAC) Power down. IN1 link = reset installer code. IN1 + IN2 = full default (wipes everything)
Tecom ChallengerPlus Briefly fit then remove test link 1 to restore the default installer PIN
Bosch Solution 2000/3000 Default button on the board (unless disabled at location 0900)
Risco LightSYS Plus HandyApp scans the panel ID and gives a reset key. Enter it within 5 minutes of the panel reset
Ness D8x / D16x PROG/TAMP link off at power-up drops straight into program mode
Hills Reliance XR Default from the keypad menu. Re-enrol keypads with the board's learn button

Still stuck

The manufacturer or distributor can often help with proof of ownership. Some panels just need a board swap.

Related

Siren won't stop
Still stuck? Ask TechMate

Checked Nov 2026 · Report an error