Home › Hills / DAS › Hills Reliance XR
Hills / DAS · Alarm panel

Hills Reliance XR

Defaulting, enrolling keypads and getting the app connected.

Quick fix

  1. Into programming: Menu › installer code › Program.
  2. Default: Menu › installer code › Program › Default › All. Hills say always default before programming a new install.
  3. After a default: re-enrol keypads by holding the learn button on the board for about 2 seconds.
  4. Zones: Program › Zones › Input. Each zone has an armed and a disarmed profile.
  5. App: UltraSync+. Needs the panel on DHCP with internet, the serial number, user name, PIN and UltraSync passcode.

Draft. Not yet checked on site. Confirm against the manual. Report an error

App won't connect

  • User names are case sensitive.
  • The panel needs DHCP and internet. For a static IP, follow the static IP steps in the quick programming guide.
  • Push notifications are set up in the app, not the panel.

DAS

DAS (Direct Alarm Supplies) is Hills' distribution arm, so DAS Reliance XR and Hills Reliance XR are the same family.

Specs at a glance
Programming
Keypad, web browser, UltraSync+ app, DLX900
Serial number
On the board, or Menu › Settings › Status › Panel Details
Web access passcode
8 digits. All zeros disables it
Legacy NX bus devices
Limited. Can't program the XR
Manuals & downloads

Related

Keypad dead or blankNot reporting to monitoringLocked out of an alarm panel
Still stuck? Ask TechMate

Checked Nov 2026 · Report an error